Troubleshooting Measures - WMF 5 Mode D'emploi

Troubleshooting measures

6 Troubleshooting measures
Problem
After rinsing, only cold > Repeat start-up.
water comes out during
> Make sure that the water tank has been filled sufficiently with water.
start-up.
> Do not interrupt the rinse procedure.
The ready indicator flashes Is the water tank empty?
red.
> Fill the water tank with cold water.
No water is released.
Is the float blocked in the water tank (see Fig. 7)?
> Where necessary, remove all foreign particles blocking the float.
> Descale the water tank.
The x2 button flashes red. The appliance needs descaling.
> Descale the coffee pad machine.
Pump emits loud noises. Has the suction cap been fitted correctly (see Fig. 7)?
> Check to ensure that the suction cap is fitted securely to the floor of the water
tank.
The suction cap still needs to be fitted securely even if you are not using a water
filter.
Troubleshooting measure
en
27