Metrological Inspection; Manufacturer's Guarantee - uebe visomat handy IV Mode D'emploi

G
Producer UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim/Germany
Metrological inspection
(for professional users)
A metrological inspection corresponding to
the "Regulations for the Retail of Medical
Products" should be carried out every two
years either by Uebe Medical GmbH, a public
authority responsible for weights and measu-
res or by an authorised service centre.
On request, the responsible authority or
maintenance service will be sent a copy of
the "Instructions for metrological inspec-
tions" by the manufacturer.
GB-54
Manufacturer's guarantee
The equipment was manufactured and tested
with great care. However, in the unlikely
event of a defect being detected after deli-
very, we are prepared to give a guarantee in
accordance with the following conditions:
1. During the guarantee period of 3 years
from the date of purchase, we reserve the
right to either repair any such defect at
our expense or supply a perfect replace-
ment unit (in any case the defective equip-
ment must be returned to our factory).
2. Excluded from the guarantee are parts
subject to normal wear and tear as well
as damage caused by non-compliance
with the operating instructions, improper
Appendix