Metrological Inspection - uebe visomat medic Mode D'emploi

E
Technical information
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany

5. Metrological inspection

(previously calibration)
Basically, a metrological inspection is recommended at intervals of 2 years.
However, professional users in Germany have to comply with the aforementioned
according to the "Regulation for Operators of Medical Devices". This can be imple-
mented either by UEBE Medical GmbH, an authority responsible for metrology, or
authorised maintenance services. For this, please observe your national provisions.
Upon request, responsible authorities or authorised maintenance services receive
a "Test instruction for metrological inspection" from the manufacturer. Important:
No modifications, e.g. opening the unit, may be made to this unit without the
manufacturer's prior permission.
EN-34