Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
E
4. Original spare parts and accessories
The following original spare parts and accessories are available from specialist
dealers:
Cuff type H5 (for wrist circumference 12.5-21.5 cm)
Part no. 2105001, PZN 06414493
Subject to technical modifications.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
5. Metrological inspection
(previously calibration)
Basically, a metrological inspection is recommended at intervals of 2 years.
However, professional users in Germany have to comply with the aforementioned
according to "Regulation for Operators of Medical Devices". This can be
implemented either by UEBE Medical GmbH, an authority responsible for
metrology, or authorised maintenance services. For this, please observe your
national provisions. Upon request, responsible authorities or authorised
maintenance services receive a "Test instruction for metrological inspection" from
the manufacturer.
Important: No modifications, e.g. opening the unit (except to replace the batteries)
may be made to this unit without the manufacturer's prior permission.
EN-50
Technical information
General provisions
1. Explanation of symbols
This product complies with the Council Directive 93/42/EC from
C
5 September 2007 regarding medical devices and bears the mark
0123
Symbol Schutzgrad P2757C.ai 20.01.2010 09:22:19
M
CE 0123 (TÜV SÜD Product Service GmbH).
Y
CM
Degree of protection against electric shock: TYPE BF
MY
CY
Please observe operating instructions
CMY
Storage and transportation conditions
K
Ambient temperature -5 to +50 °C
Protect against moisture/humidity
Rel. air humidity up to 85 %
Keep dry
Protected against solid foreign particles with a diameter of more
IP20
than 12.5 mm, no protection against water.
Manufacturer
2. Disposal
Batteries and technical appliances must not be disposed of with
domestic waste, but should be handed in at the appropriate
collection and disposal points.
F
EN-51
Publicité
Chapitres
Table des Matières
