Original Spare Parts And Accessories; Technical Inspection / Calibration Check; G General Provisions; Explanation Of Symbols - uebe Visomat double comfort Mode D'emploi

F

4. Original spare parts and accessories:

The following original spare parts and accessories are available from specialist
dealers:
• Universal cuff 23-43 cm type UWK
Part. no. 2405001
PZN 07514096
• Cuff 14-23 cm type USK
Part. no. 2405005
PZN 07514104
• visomat ® double comfort software
download under
www.visomat.de
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany

5. Technical Inspection / calibration check

Basically, a metrological inspection is recommended at intervals of 2 years. Howev-
er, professional users in Germany are obligated to comply with the aforementioned
according to "Regulation for Operators of Medical Devices".
This can be implemented either by UEBE Medical GmbH, an authority responsible
for metrology, or authorised maintenance services. For this, please observe your
national provisions.
Upon request, responsible authorities or authorised maintenance services receive a
"Test instruction for metrological inspection" from the manufacturer.
Important: No modifications, e.g. opening the unit (except to replace the batter-
ies) may be made to this unit without the manufacturer's prior permission.
EN-84
Technical information
• Mains adapter type A1
Part. no. 2401020
PZN 03558547
• USB cable
Art. Nr. S2405090
Type A USB / Type Mini USB
Subject to technical modifica-
tions.
General provisions

1. Explanation of symbols

This product complies with the Council Directive 93/42/EC from 5
C
September 2007 regarding medical devices and bears the mark CE
Symbol Schutzgrad P2757C.ai 20.01.2010 09:22:19
M
0123
0123 (TÜV SÜD Product Service GmbH).
Y
CM
Degree of protection against electric shock: TYP BF
MY
CY
Please observe instructions for use
CMY
Storage and transportation conditions
K
Ambient temperature -5 to +50 °C
Relative humidity up to 85%,
non-condensing
Keep dry
Protected against solid foreign particles with a diameter of more
IP20
than 12.5 mm, no protection against water.
Manufacturer
Mains adapter specifications:
If using the optionally available mains adapter:
Equipment class II (double-insulated)
Internal fuse
For indoor use only
Internal polarity positive
G
EN-85