Blood Pressure Measurement - uebe visomat handy IV Mode D'emploi

C
5. Blood pressure measurement
Once the necessary pressure in the cuff
is reached, the pump stops and the air
escapes automatically. The falling cuff
pressure appears in the display.
After a short time, the symbol "" flashes
in time with your pulse. At the end of the
measurement the remaining air escapes
automatically from the cuff. The display
unit than shows the measured value of the
blood pressure alternating in time with the
pulse speed. When a new measurement is
started, or the device is switched off, the
values of systolic and diastolic blood pres-
sure are automatically memorized.
GB-42
Display unit operation
Enter the memorised value in your
blood pressure chart. This will provide
you with an overview of your blood
pressure situation for a longer period,
which you can discuss with your doctor
if necessary.