Original Spare Parts And Accessories; Metrological Inspection - uebe visomat comfort form Mode D'emploi

D

4. Original spare parts and accessories:

The following original spare parts and accessories are available from specialist
dealers:
Cuff UPW (for arm circumference 23-43 cm)
Part no. 2403001
PZN 0044977
Cuff US (for arm circumference 17-25 cm)
Part no. 2403005
PZN 0044960
Mains adapter type A1
Part no. 2401020
PZN 3558547
Subject to technical modifications.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim, Germany
EN-50
Technical information Technical information

5. Metrological inspection

(previously calibration)
Basically, a metrological inspection is recommended at intervals of 2 years. However,
professional users in Germany have to comply with the aforementioned according
to the "Regulation for Operators of Medical Devices".
This can be implemented either by UEBE Medical GmbH, an authority responsible
for metrology, or authorised maintenance services. For this, please observe your
national provisions.
Upon request, responsible authorities or authorised maintenance services receive a
"Test instruction for metrological inspection" from the manufacturer.
Important: No modifications, e.g. opening the unit (except to replace the batteries),
may be made to this unit without the manufacturer's prior permission.
D
EN-51