EN
BEFORE USING YOUR FRIDGE
4
General warnings
WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear
of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type recommended
by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: To avoid a hazard due to the instability
the instructions.
If your appliance uses R600a as a refrigerant –
you can learn this information from the label on
the cooler- you should be careful during shipment
and montage to prevent your appliance's cooler
elements from being damaged. Although R600a
is a environmental friendly and natural gas, as it
due to a damage in the cooler elements move
ventilate the room where the appliance is located
for a few minutes.
While carrying and positioning the fridge, do not
give damage to the cooler gas circuit.
appliance.
The appliance is intended solely for household
use.