BEFORE CALLING SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in
improper levels or when a problem occurs in the appliance. Warning
codes are displayed in the Freezer and Cooler Indicators.
If your fridge is not operating;
Is there any electrical fault?
Is the plug is placed properly in the socket outlet?
Is the fuse of the socket outlet that the plug is plugged or the main
fuse blown?
Is the temperature setting is on correct level?
fridge into a socket outlet which you are sure that is working.
If your fridge is not cooling enough;
Is the temperature setting is on correct level?
Is the door of your fridge opened frequently and left open for a long
while?
Is the door of fridge closed properly?
Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
Is there adequate distance between your fridge and the rear and side
walls?
operating manual?
If the food in your refrigerator compartment is over cooled
Is the temperature adjustment right? (Is the refrigerator temperature
setting level is SC?)
Are there many food recently put inside the freezer compartment?
If so, your fridge may over cool the food inside the refrigerator
compartment as it will operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from
time to time. Noises from your fridge at this time are normal and due to
its function. When the required cooling level is reached, noises will be
EN
33