EN
BEFORE USING YOUR FRIDGE
8
Installing and operating your fridge
Before starting to use your fridge, you should pay attention to
the following points:
Operating voltage for your fridge is 220-240 V at 50Hz.
Mains cord of your fridge has a grounded plug. This plug
should be used with a grounded receptacle that has a
16 ampere fuse minimum. If you don't have a receptacle
electrician.
We do not take the responsibility of the damages that
occur due to ungrounded usage.
to direct sunlight.
Your appliance should be at least 50 cm away from stoves,
Gas ovens and heater cores, and should be at least 5 cm
away from electrical ovens.
Your fridge should never be used outdoors or left under
the rain.
should be at least 2 cm between them to prevent humidity
on the outer surface.
Do not place anything on your fridge, and install your fridge
in a suitable place so that at least 15 cm is available on the
upper side.
The adjustable front legs should stabilized in an appropriate
height to allow your fridge operate in a stable and proper
way. You can adjust the legs by turning them clockwise
(or in the opposite direction). This should be done before
placing food in the fridge.
Before using your fridge, wipe all parts with warm water
added with a tea spoonful of sodium bicarbonate, and
then rinse with clean water and dry. Place all parts after
cleaning.
Install the distance adjustment plastic (the part with black
to prevent the condenser from touching the wall.