Instructions For Use; Safety Instructions - Ugin ARTIS NEO Mode D'emploi

Instructions for use (rev 290319)
D. INSTRUCTIONS FOR USE

1. SAFETY INSTRUCTIONS

Carefully read the instructions in the manual
This furnace must be operated only by dental professionals.
Other uses than the ones stipulated will immediately invalidate the warranty.
During operation and after use, the surface of the furnace head may become hot. Direct
contact with the skin should therefore be avoided.
Wear suitable gloves when handling support and the prosthetic objects
The unit must be connected to an electrical installation in accordance with the applicable
standard in the country in which it is being used. This installation should provide protection
against overcurrent, overload and ground faults.
Ensure that the connection cables are in perfect condition to prevent short circuits.
Ensure that the movement of the carrier plate is not blocked by an object, this may result in
malfunction of the unit and damage to certain components.
The furnace must be placed on a flat surface, keeping sufficient clearance around the unit to
ensure proper ventilation.
Do not block the ventilation openings to avoid the risk of overheating
Before any technical intervention, the unit must be switched off (with the breaker) and
disconnected from the mains power supply.
Use only genuine spare parts. Placing not genuine spare parts can void your warranty,
moreover can make the apparatus not in compliance with the norms, and dangerous when in
use.
Do not introduce stranger objects inside the unit during the maintenance operations.
Do not execute different operations of maintenance from those brought back in the manual.
Whichever operation not included in this manual, can involve risks.
For whichever inherent information concerning installation, maintenance and use of the unit,
contact the customer's service UGIN DENTAIRE.
UGIN DENTAIRE
ARTIS NEO
22