Reely SKY F-16 ARF Notice D'emploi page 42

Extend all servo cables using suitable extension cables and install them to the
cockpit along with the battery connection cables.
Attach the bottom part of the fuselage to the top part of the fuselage using the
attachment screw (1).
Make sure that the rear fuselage also cleanly rests on the top part gap-free.
Cut out the fuselage protection shell along the outlines.
Put the shell onto the bottom part of the fuselage and attach it using two long
strips of adhesive tape on the left and the right side.
You can do without this part if you only land in high grass. If you
land on a normal lawn, we recommend installing the protective
shell.
42
Figure 28
Figure 29
Figure 30