Thetford Marine TECMA Nani Premium PLUS Manuel D'installation Et D'utilisation page 37

CAUTION!
This single fl ush over-ride function can cause over fi lling of a waste tank. For Emergency Use Only.
Disabling/Re-enablling Lockout Protection
■ Flush Lockout normally occurs when the holding tank becomes almost full. When this occurs, pushing the flush button causes tank symbol to flash, but does not
cause a flush.
Enabling Lockout
Press both buttons twice
(0.5<, <1.0 sec. 2 times)
{ Lockout ENABLED.
Unlock symbol light turns OFF
CAUTION!
Disabling the Toilet Lockout Function can cause overfl owing of the waste tank.
Emergency Use Only.
www.thetfordmarine.com
Single Flush Override of
Flush Lockout
{ Toilet will not fl ush automaticalli when tank level
indicator is red.
Press and Hold
(>8.0 sec.)
{ Initiates one fl ush.
{ Flush Lockout reactivates.
37
Disabling Lockout
{ Lockout DISABLED.
Unlock symbol light turns ON
Note:
This red symbol will remain on
as long as lockout is disabled, even if the
holding tank is emptied.
Tecma Nano PREMIUM Owner's & Installation Manual
Press both buttons twice
(0.5<, <1.0 sec. 2 times)