Thetford Marine TECMA Nani Premium PLUS Manuel D'installation Et D'utilisation page 28

Note:
Refer to Fig, C, D and E for all part references.
1
1
Place 1 in permanent position; trace outline.
4
L
L
Feed through wall; connect to
7
H
3-1/2" 1(x)
Locate H position; cut hole.
Tecma Nano PREMIUM Owner's & Installation Manual
Installation
2
Mark / Cut hole 2- 5/8" x 3-3/4" and drill holes for
mounting screws.
5
F
+
T000013A
T000014A
F
Materials Not Provided
■ In-line Strainer (if applicable)
■ 3/4" - diameter water supply line (Raw Water installation)
■ 3/4"- diameter minimum Vented Loop – if required (Raw Water installation)
■ 1/2" - diameter water supply line (Fresh Water installation)
■ 1-1/2"- diameter minimum Vented Loop – if required
■ 1-1/2"- diameter Marine Discharge Hose
■ 1-1/2"- straight or 90
■ Silicone caulk (white or clear)
■ Various Electrical Connectors
2- 5/8"
3-3/4"
M
12' - plan accordingly!
F
-
Black wire
Red wire
J
NP
NP
O coupling (as needed)
3
DO NOT attach to wall!
M
L
L M
Slide through .
6
Attach Water Supply
■ Fresh Water Installations -
refer to the Solenoid Harness and Acces-
sory
Kit instructions
■ Raw Water Installations -
refer to the Pump Harness and Accessory
Kit instructions
28
www.thetfordmarine.com