Model Identification - Thetford Marine TECMA Nani Premium PLUS Manuel D'installation Et D'utilisation

Model Identifi cation
The premium plus has the ADD WATER and FLUSH buttons and the tank sensor indicator located below the FLUSH button.
The toilet's wall switch control has two primary functions:
■ An ADD WATER button – Adds approximately 0.5L of water each time it is pushed momentarily. Electronics prevent overfill.
■ A FLUSH button – Starts an add water and macerate sequence that runs the motor and adds water twice for maximum cleansing and minimum water usage. Se-
quence ends with a small amount of water added to the bowl to provide an odor trap. Recommended to minimize water use and for liquid waste disposal without
adding water.
ADD WATER
recommended before flushing solid waste
Press and
release
(Approx. 1 sec.)
{ Adds approx. 0.5 L of water
Can be repeted but only until max amount is reached
www.thetfordmarine.com
Operation
Premium Plus Model
33
T00002 T000029A
recommended for flushing liquid waste (minimize
Press and
release
(Approx. 1 sec.)
{
Starts FLUSH sequence
• Adds approx .25L of water
• Macerates
• Adds .75L of water
• Refi lls bowl
{ The amount of water refi lled into the
bowl can be adjusted per the Water
Refi ll Programming Mode
Tecma Nano PREMIUM Owner's & Installation Manual
FLUSH
water usage)