11.1.3 Accessing saved FM stations
1. Briefly press one of the station preset buttons on the remote control.
W The selected station is played.
11.2
DAB radio
11.2.1 Finding a DAB station
Automatic tuning condition:
The DAB/FM antenna is connected.
Fig.38. Automatically finding a DAB station
1. In DAB playback mode, press the [SETUP] button.
W The display shows [DAB Preset List] (Fig.38)
2. Turn the click wheel until [DAB Full Scan] is displayed.
3. Press the click wheel on the device or the [OK] button on the remote control to
confirm the selection.
W The device now searches for available radio stations and plays the first
available station.
The station scan takes place automatically when first switching to DAB mode or after
resetting to factory settings.
Manual tuning condition:
The DAB/FM antenna is connected.
Fig.39. Manually tuning a DAB station
1. In DAB playback mode, press the [SETUP] button.
W The display shows [DAB Preset List].
2. Turn the click wheel until [DAB Manual Tune] is displayed (Fig.39).
86
© sonoro audio GmbH 2018