Connecting The Power Cord; Connecting The Antenna; Preparing The Remote; Connecting Sonorolight - Sonoro LOUNGE SO-320 Mode D'emploi

7.3

Connecting the power cord

The device is supplied with power by means of the supplied mains cable. The AC
transformer is integrated in the device itself.
1. Insert the plug of the mains cable into the power socket on the back of the device.
2. Insert the mains plug in the outlet.
7.4

Connecting the antenna

1. Screw the rod antenna located on the back of LOUNGE to the FM/DAB antenna
connector.
2. If you are using the rod antenna, pull the arms of the rod antenna apart and align
the antenna so that you have the best possible reception.
7.5 Preparing the remote control
Fig.7. Inserting the battery in the remote control
1. Open the battery compartment of the remote control (Fig.7)
2. Insert the supplied button cell (CR2032, 3 V) with the label side (+) up.
3. Close the battery compartment.
7.6

Connecting sonoroLIGHT

In order to be able to control a lamp using the Bluetooth function, you must connect
sonoroLIGHT and LOUNGE once. Connected devices are stored and later connected
automatically.
Follow the sonoroLIGHT operating instructions.
66
© sonoro audio GmbH 2018