Connecting The Headphones; Setting The Basic Functions; Switching On The Device For The First Time; Standby Mode - Sonoro LOUNGE SO-320 Mode D'emploi

Masquer les pouces Voir aussi pour LOUNGE SO-320:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Plug sonoroLIGHT into a socket.
2. Ensure that sonoroLIGHT and LOUNGE are no more than 10 m away from one
another. Otherwise, no connection can be established.
3. Press the button on your sonoroLIGHT.
W sonoroLIGHT searches for another Bluetooth device.
4. Press the [Light] button on your LOUNGE and hold it for 3 seconds.
W The devices are connected to one another. No password needs to be
entered. Once the devices are successfully connected, the [Light] button
lights up in white.
5. Connect a lamp to the socket on your sonoroLIGHT.
7.7

Connecting the headphones

Headphones with a 3.5 mm jack plug (not supplied) can be connected to the device.
1. Turn the click wheel to the left to set the volume to minimum.
2. Insert the headphone jack plug into the port on the back of the device.
3. Slowly turn the click wheel to the right to increase the volume.
8.

Setting the basic functions

The individual menus let you select the functions and settings of the device.
8.1

Switching on the device for the first time

After you have switched the device on for the first time, the LCD display shows the
clock display and the [Tune to FM RDS station to set time & date] message.
In FM/DAB mode, the time and date are set automatically unless this function has
been disabled.
8.2

Standby mode

The following settings can be configured in the Standby mode:
Setting the time manually.
Setting the date manually.
Switch the date on the display on/off.
© sonoro audio GmbH 2018
GB
67

Publicité

Table des Matières
loading

Table des Matières