System Settings; Accessing The System Settings; Equalizer; Network - Sonoro RELAX SO-810 Mode D'emploi

20

System Settings

20.1 Accessing the system settings

▪ Press SETUP in any playback mode and then select [System Settings]
▪ Refer to the chapters below for details of each setting option.
The current settings (if applicable) are marked with an asterisk (*).
▪ See chapter "Using the menus" for browsing and making selections in
the system settings.

20.2 Equalizer

▪ Select one of the sound equalizer options including: [Loudness], [Jazz],
[Rock], [Movie], [Classic], [Pop], [News], [My EQ] and [My EQ profiles
setup].
▪ [My EQ Profile Setup] allows you to set your own bass and treble
levels.

20.3 Network

▪ [Network Wizard]
To establish network connection.
▪ [WPS WLAN Setup]
Select this option if your wireless router supports both WPS and PBC
setup methods.
▪ [View Settings]
To view the current network information.
▪ [Wlan Region]
To select a WLAN region.
▪ [Manual Settings]
Under the [Wireless] option, select [DHCP enable] to allocate IP
address automatically or [DHCP disable] to do it manually.
▪ [NetRemote PIN Setup]
To set up a NetRemote PIN.
▪ [Network Profile]
To display a list of networks saved by RELAX.
© sonoro audio GmbH 2017
111