9.6
Switching the alarm function on/off
Switching the alarm function on
1. To switch on the alarm clock, briefly press the [Alarm 1] or [Alarm 2] button on the
front of the device or the remote control.
Switching the alarm function off
2. To switch off the alarm clock, briefly press the [Alarm 1] or [Alarm 2] button again.
9.7
Switching off the alarm clock after the alarm sounds
1. To switch off the alarm, press one of the following buttons:
•
[Alarm 1]
•
[Alarm 2]
•
Click Wheel
•
[Standby]
W The alarm will remain activated for the next day. This does not apply if the
non-recurring alarm setting is in use. The alarm light remains on and retains
its current brightness.
After 60 min, the alarm is switched off automatically.
2. Press the [Light] button to switch the alarm light off.
3. To switch the alarm clock off and have it come back on after a set period of time
(Snooze), press the [SNOOZE] button on the remote control.
Alternatively, you can turn the click wheel when the alarm sounds to set the snooze
time. Press the click wheel to confirm.
W The remaining snooze time is displayed. After the set time expires, the
alarm will sound again.
© sonoro audio GmbH 2018
GB
81