System Settings; Accessing The System Settings; Equalizer; Network - Sonoro STREAM SO-411 Mode D'emploi

16 System settings

16.1

Accessing the system settings

Press SETUP in any playback mode and then select [System Settings]
•
Refer to the chapters below for details of each setting option.
•
The current settings (if applicable) are marked with an asterisk (*).
See chapter "Using the menus" for browsing and making selections in the
•
system settings.
16.2

Equalizer

Select one of the sound equalizer options including: [Normal], [Bath], [Jazz],
•
[Rock], [Movie], [Classic], [Pop], [News], [My EQ] and [My EQ profile setup].
[My EQ profile setup] allows you to set your own bass and treble levels.
•
16.3

Network

[Network wizard]
•
To establish network connection.
[PBC Wlan setup]
•
Select this option if your wireless router supports both WPS and PBC setup
methods.
[View settings]
•
To view the current network information.
[Manual settings]
•
Under the [Wireless] option, select [DHCP enable] to allocate IP address
automatically or [DHCP disable] to do it manually.
[NetRemote PIN Setup]
•
To set up a NetRemote PIN.
[Network profile]
•
To display a list of networks saved by STREAM.
[Clear network settings]
•
To clear all network settings.
82 © sonoro audio GmbH 2022