Advanced Programming Features; Sensor Bypass; Easy Retrieve Memory - Hunter NODE Manuel De L'utilisateur

ADVANCED PROGRAMMING FEATURES

All advanced programming functions are initiated from the idle mode,
which shows the time, day of the week, and battery-life indicator on
the display . If something is flashing on the display then the controller is
in one of the programming modes . After a short period of inactivity the
controller will return to idle mode .

Sensor Bypass

1 . From the idle mode, press and hold the
is displayed.
2 . The display will show the umbrella icon flashing and ON.
3 . Press the button to bypass the sensor. The display will show
and OFF to indicate the weather sensor is bypassed.
The icon will show on the display during normal operation,
indicating the controller is in bypass mode.
4 . To reactivate the weather sensor, press and hold the
until the icon is displayed. Press the
normal sensor mode.

Easy Retrieve Memory

This function allows the user to save a preferred program to permanent
memory in the controller, which can be restored at any time . This is a
great way to override changes made, and revert back to the original
programming schedule .
To save a program:
button until the icon
1 .
2 . From idle mode, press and hold the
3 . The screen will show three dashed lines moving from left to right
To retrieve a saved program:
1 .
button
2 . The screen will show three dashed lines moving from right to
button to return to
The controller now has the preferred program as the current program .
The display will flash DONE when the process is complete .
Make sure that the controller is programmed with the preferred
programming schedule.
seconds to save the current program.
to indicate the current program is being saved to permanent
memory. The display will flash DONE when the process is
complete.
From idle mode, press and hold the
seconds.
left to indicate the preferred program is being retrieved from
memory.
EN
and button for five
and button for five
12