Programming; Setting The Date And Time; Setting Watering Start Times - Hunter SVC-100 Guide De L'utilisateur Et Instructions D'installation

PROGRAMMING

The SVC utilizes independent station programming.
For each station being programmed, you need to program
at least one Start Time, a Run Time, and Water Day(s).
The button allows you to quickly navigate among
programming options.
The SVC display shows time and day when the
is pressed. The button allows you to easily navigate
among programming options. During a short period of
inactivity, the display will shut off to retain battery power.
When programming, the flashing portion of the display can
be changed by pressing the
something that is not flashing, press the
until the desired item is flashing.
The SVC allows for up to 9 start times per day. Multiple
start times permit morning, afternoon, and evening water-
ing, perfect for the establishment of new lawns and thirsty
annual flowers. Simply designate the days of the week you
want to water. The SVC makes it easy.

Setting the Date and Time

1. Press the button until the Current Time/Day icon
is displayed.
8
button
or buttons. To change
or buttons
2. Hours will be flashing. Press the
change the hour shown on the display. Press the
proceed to setting the minutes.
3. Minutes will be flashing. Use the
change the minutes shown on the display. Press the
to proceed to select AM, PM, or 24 hour time.
4. The time will be displayed, and the time of day flashing.
Press the or button to select AM, PM, or 24 hour.
Press the to proceed to setting the day of the week.
5. The number 1 will be flashing at the bottom of the
display, indicating the first day of the week. Press
the or buttons to select the day of the week
(1 through 7) corresponding to the day.
The time and day have now been set.

Setting Watering Start Times

1. Push the button until the Start Times icon
displayed. A Start Time or "Off" will be flashing. The
number directly to the left of the start time number
(1 through 9) indicates the start time number. The
number directly below the start time number indicates
the station being programmed.
2. Use the or button to change the start time.
(The start times advance in 5 minute increments.)
or button to
to
or button to
is