Setting Watering Days; Selecting Odd/Even Days To Water; Selecting Interval Days To Water; Setting The Seasonal Adjustment - Hunter NODE Manuel De L'utilisateur

PROGRAMMING (CONTINUED)

Setting Watering Days

1 . Press the button until the
2 . The program letter (A, B, or C) will be displayed.
3 . Arrows point at the specific days of the week on which watering
will occur. Press the or
4 . Press the button to activate that day for the program displayed, or
the button to cancel watering for that day. The arrow will show
on the watering days for the active program.
5 . Press the button to set days to water for a different program, if
desired.
6 . Press the button to proceed to the next programming function
or allow controller to return to idle mode.

Selecting Odd/Even Days to Water

This feature uses numbered days of the month for watering instead of
specific days of the week .
1 . Press the button until the
2 . Press the button until the cursor is above either ODD or EVEN
on the display.
3 . Press the button to select, or the
ODD or EVEN days to water.
4 . Once ODD or EVEN mode is activated, it will be the only cursor
shown on the display.
9
icon is displayed.
buttons to scroll though the days.
icon is displayed.
button to cancel either

Selecting Interval Days to Water

1 . Press the button until the
2 . Press the button until the cursor is above INT on the display.
3 . Press the button and a 1 will be flashing, indicating the number
of days between watering.
4 . Press the or buttons to select the number of days between
watering days (1 to 31).

Setting the Seasonal Adjustment

1 . Press the button until the
2 . Press the or button to increase or decrease the seasonal
adjustment value from the default 100% (down to a minimum of
10% or a maximum of 150%).
3 . The value programmed for seasonal adjustment will be applied to
all irrigation programs and will immediately be reflected in
the run times displayed. For example, if 20-minute run times are
programmed and then the seasonal adjustment is changed from
100% to 50%, the run times displayed will be 10 minutes.
EN
O
icon is displayed.
INT
is displayed.