Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
#4016079 Insert for mounting head
#4028566 Motorcycles wheel adapter
(Optional on the model, monty 1520)
#4029448
7" wheel adapter kit
(Optional)
1.8 Safety Devices
This machine has several protectors made of plastic to
prevent compression or crushing hazards.
The rotation speed of the chuck has been limited to a maxi-
mum of 12 rpm to prevent dragging or entrapping hazards.
6
2.0 Carriage Instructions
The machine is crated in a wooden box of appropriate
strength.
The box is mounted to the pallet.
Handling of the machine must be made with an
appropriate lifting device (fork lift) (Fig. 2.0).
748/747
2.0
2.0
2.0
2.0
2.0
2.1 Uncrating Instructions
Uncrate the machine paying attention when removing the
nails or during any other operation which may be
hazardous.
After removing the crate check for any visible damage to
the machine and its components.
In case of doubts, call qualified personnel for assistance.
The packing materials (plastic bags, polystyrene, nails,
screws, wood etc.) must be properly disposed of.
Place the above-mentioned materials into a trash
container and dispose per local regulations.
ALWAYS WEAR GLOVES WHEN UNCRATING THE
MACHINE TO PREVENT SCRATCHES OR ABRASIONS
DUE TO THE CONTACT WITH PACKING MATERIALS.
2.1.1 Transporting the machine at site
Suitable lifting cables and lifting facilities should be used
for transporting the machine.
Always mind the centre of gravity of the machine (Fig.
2.0.1).
Transport using lifting facilities
2. 2. 2. 2. 2.0 0 0 0 0 .1 .1 .1 .1 .1
19
1067
Publicité
Table des Matières
