Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Water supply
• Cooling and hot water supply in industries and
building services
• Filter systems, and so on.
• Heating systems
• Condensate transportation
Additional uses for optional material:
• District heating
• General industry
• Food and beverage industry
Improper use
WARNING:
Improper use of the pump may create
dangerous conditions and cause person-
al injury and damage to property.
An improper use of the product leads to the loss of
the warranty.
Examples of improper use:
• Liquids not compatible with the pump construc-
tion materials
• Hazardous liquids (such as toxic, explosive, flam-
mable, or corrosive liquids)
• Potable liquids other than water (for example,
wine or milk)
Examples of improper installation:
• Hazardous locations (such as explosive, or cor-
rosive atmospheres).
• Location where the air temperature is very high
or there is poor ventilation.
• Outdoor installations where there is no protection
against rain or freezing temperatures.
DANGER:
Do not use this pump to handle flamma-
ble and/or explosive liquids.
NOTICE:
• Do not use this pump to handle liquids containing
abrasive, solid, or fibrous substances.
• Do not use the pump for flow rates beyond the
specified flow rates on the data plate.
Special applications
Contact the local sales and service representative in
the following cases:
• If the density and/or viscosity value of the pump-
ed liquid exceeds the value of water, such as wa-
ter with glycol; as it may require a more powerful
motor.
• If the pumped liquid is chemically treated (for ex-
ample softened, deionized, demineralized etc.).
• Any situation that is different from the ones that is
described and relate to the nature of the liquid.
3.2 Pump description
See
Figure 3
for an explanation of the description
code for the pump and one example.
3.3 Nameplate
The nameplate is a metal label that is located on the
motor adapter. The name plate lists key product
specifications. For more information, see
The nameplate provides information regarding the
impeller and casing material, the mechanical seal
and their materials. For more information, see
5
.
IMQ or TUV or IRAM or other marks (for electric
pump only)
Unless otherwise specified, for products with a mark
of electrical-related safety approval, the approval re-
fers exclusively to the electrical pump.
3.4 Design structure
Part
Casing
Impeller
Shaft seal
Bearings
See the sectional drawing
3.5 Material
The metallic parts of the pump that come in contact
with water are made of the following:
Standard/
Optional
Standard
Standard
Standard
Standard
3.6 Mechanical seal
Unbalanced single mechanical seal acc. EN 12756,
version K Dimensions.
3.7 Application limits
Maximum working pressure
This flow chart shows the maximum working pres-
sure depending on the pump model and the temper-
ature of the pumped liquid.
Figure 4
en - Original instructions
Description
• Radial split volute casing
• Suction and discharge flange in one
axis
• Replaceable wear ring
• Closed radial impeller with wear
rings on both sides
• Single mechanical seal acc. EN
12756
• Radial ball bearings of motor
• Grease lubrication
Figure 6
.
Material code
CC
Cast iron / Cast
CB
CS
Cast iron / Fab-
CN
Figure
Material cas-
ing/impeller
iron
Cast iron /
Bronze
ricated Stain-
less steel
Cast Iron /
Stainless steel
15
Publicité
Table des Matières
Dépannage
