General Warnings; Guarantee And Responsibility; Installation Safety Notes - Riello 3010123 Manuel D'entretien

1

General warnings

1.1

Guarantee and responsibility

The rights to the guarantee and the responsibility will no longer
be valid in the event of damage to things or injury to people, if
such damage/injury was due to any of the following causes:
 intervention of unqualified personnel;
 carrying out of unauthorised modifications on the equipment;
 powering of the burner with unsuitable fuels;
 faults in the fuel supply system;
 repairs and/or overhauls incorrectly carried out;
 use of non-original components, including spare parts, kits,
accessories and optional;
 force majeure.
The manufacturer furthermore declines any and every responsi-
bility for the failure to observe the contents of this manual.
1.2

Installation safety notes

It is obligatory to carry out all installation, mainte-
nance and disassembly operations with the elec-
tricity supply disconnected.
DANGER
Isolate the fuel supply.
DANGER
The installation must be carried out by qualified
personnel, as indicated in this manual and in
compliance with the standards and legal requi-
sites in force.
WARNING
2902828
General warnings
– Personnel must always use the personal protective equip-
ment envisaged by legislation and follow the indications giv-
en in this manual.
– Personnel must observe all the danger and caution indica-
tions shown on the machine.
– Personnel must not carry out, on their own initiative, opera-
tions or interventions that are not within their province.
– Personnel must inform their superiors of every problem or
dangerous situation that may arise.
CAUTION
4 GB
After removing all the packaging, check the integ-
rity of the contents. If in doubt, do not use the kit;
contact the supplier.
Wait for the components in contact with heat
sources to cool down completely.
After carrying out maintenance, cleaning or
checking operations, reassemble the hood and all
the safety and protection devices of the burner.