Conti CC100 Notice Technique page 33

Temperature unit choice:
° C or ° F
All values are automatically converted.
Steam boiler temperature adjustment:
Adjustment range:
We advise 117° C .
To change temperature press + or –
To exit, press MENU, or wait 30 seconds.
Filling up Time out adjustment:
Adjust maximum opening time of the inlet solenoid valve ; beyond this time, machine stops and an
alarm message is displayed in order to indicate that no water goes in the boiler.
Adjust time with + or – ( up to 360 sec max)
To exit, press MENU, or wait 30 seconds.
Water Filter:
Adjust water volume for the water softener maintenance (0 to 9999 litres)
Press + or – to adjust. (Hold the key for 5 seconds
To exit, press MENU, or wait 30 seconds.
When water volume is reached, display shows:
Procedure to reset the water counter :
When the programmed amount of water has been consumed by the machine, the message "Change
Filter" appears on the display and the service phone number to contact .
This message prompts the user to change the cartridge system of water treatment but does not prevent
the distribution of products.
Once the cartridge has been changed, you have to clear the message:
- Switch off the machine (the button ON / OFF).
- Keep pressing the keys "P3 Gr1" and "P4 Gr1" (on left group).
- Turn on the machine (the button ON / OFF), the display shows:
The count resumed at zero.
Pre Brewing utilisation:
Enables or disables pre-brewing on the 2 keys espresso.
Change with + or -.
Filling the boiler:
Allows to choose the filling of the boiler :
With pump (if the machine works with tank)
Without pump (if the machine is connected on the network)
SACOME, CONFIDENTIAL Document,
80 to 125 ° C (176 ° F ... 257° F)
Edition 07/2010 - CC100 DISPLAY
NOTES TECHNIQUES - TECHNICAL DOCUMENTS - page 31
it is forbidden to duplicate or communicate this document without previous authorization.
scroll faster)
Change H2O filter
Reset H2O filter
counter ... wait