Conti CC100 Notice Technique page 32

19.3.1.
Language:
There are 4 languages available : ENGLISH (GB-USA) – FRENCH (F) – GERMAN (G) – ITALIAN (I).
Water counter:
Press MENU to see the water quantity (liters) consumed since the last installation of the water
treatment.
Coffee counters:
Press MENU to see each key, the display shows:
Cumulative total cycles number (service purpose).
espresso number (1 small cup) on group 1, 2 and 3
2 espresso number (2 small cups) on group 1, 2 and 3
coffee number (1 large cup) on group 1, 2 and 3
2 coffees (2 large cups) on group 1, 2 and 3
NB:
- The counter goes up to 65535 for each button. Then it restarts from 0.
- A distribution is accounted for 1 time for keys " P1 Grx " or "P3 Grx" or "P5 Grx" and 2 times for
the keys " P2 Grx " and "P4 Grx" when you press a key.
Explanation about counters reset:
Coffee counter reset: when the display shows «Cumulative total», press "P4 Gr1" for 3 seconds,
the display shows then « Total Reset ».
The reset is for each key counter.
Name:
Type name to be showed on the display.
Press ENTER to go right
To change character press + or –
To finish press MENU
Service phone number:
Shown on the display together with an alarm message.
Press ENTER to go right
To change number press + or –
To finish press MENU
Dose programming access:
Dose programming authorization access.
Change with + or -.
Continual dose access:
Continual dose authorization access.
Change with + or -.
SACOME, CONFIDENTIAL Document,
Explanation for the programming steps of the technical menu:
ECO
CONTI ESPRESSO
Edition 07/2010 - CC100 DISPLAY
NOTES TECHNIQUES - TECHNICAL DOCUMENTS - page 30
it is forbidden to duplicate or communicate this document without previous authorization.