Timer / Kitchen Timer - Asko HI1995G Mode D'emploi

OPERATION

Timer / Kitchen timer

EN 18
The timer/alarmclock button of each cooking zone has two functions:
The timer function
This function can be recognized
by the red small arrow pointing
up.
The time increases in the timer
function.
The timer cannot be linked to a
cooking zone.
When the timer button is pressed,
the timer function automatically
switches on after 3 seconds if you
do nothing.
Attention
• Per set of two cooking zones (front and back) one timer/kitchen
timer is available. The 5th cooking zone has its own timer/kitchen
timer.
• The timer/kitchen timer can only be linked to one of both cooking
zones per set of two cooking zones.
• The timer-/kitchen timer function can also be used without
activating an accompanying cooking zone.
Switching on the timer
1. Press the timer/alarmclock button of the cooking zone once.
The display of the timer lights up and you'll see three zeroes
flashing. Under that appears a + and -.
• If you do not set a time with the + or - button, the timer will start
running automatically after 3 seconds. The timer can go as far as
9 hours and 59 minutes.
The red arrow pointing up lights up and the time increases.
2. Press the timer/alarmclock button of the cooking zone again, to
switch it off.
The kitchen timer function
This function can be recognized
by the red small arrow pointing
down.
The time decreases in the kitchen
timer function.
The kitchen timer can be linked to
a cooking zone. This means the
cooking zone switches off if the
set time has passed.
The kitchen timer function can be
reached from the timer function
by pressing the red + button or
red - button.