OPERATION
Recognising a mode
Timer / Kitchen timer
EN 18
• If you press the pause button again within 5 minutes, the cooking
processes which have been paused will resume.
A double audible signal sounds, the hob resumes the settings which
were in place before the pause.
• If you do not take any further action within 5 minutes:
All activities of the cooking zones are automatically switched off.
After that the pause button will keep flashing for 25 minutes to
indicate the cooking processes have been ended by the pause
mode. The hob automatically switches from the pause mode to the
eco stand-by mode after 25 minutes.
The stand-by mode
The eco stand-by mode
The childproof lock
mode
The pause mode
The timer/kitchen timer button of each cooking zone has two functions:
The timer function
This function can be recognised
by the small red arrow pointing
upwards.
The time increases in the timer
function.
The timer cannot be linked to a
cooking zone.
When the timer/kitchen timer
button is pressed, the timer
function automatically switches
on after 3 seconds if you do
nothing.
Not a single light is lit.
The red light next to the key button keeps
slowly going on and off.
The red light next to the key button is on
constantly.
The red light next to the pause button
flashes.
The kitchen timer function
This function can be recognised
by the small red arrow pointing
downwards.
The time decreases in the kitchen
timer function.
The kitchen timer can be linked to
a cooking zone. This means the
cooking zone switches off if the
set time has passed.
The kitchen timer function can be
reached from the timer function
by pressing the + or - button.