Start Taking Measurements; Pause, Resume / Stop - Oregon Scientific SE336 Manuel De L'utilisateur

to search for chest belt first. For detailed information or
if encountering difficulties, refer to "Transmission signal"
section above.

START TAKiNg MEASUREMENTS

if using only the stopwatch function:
1. Touch MODE/- to select "EXE", "HR BELT" will be
displayed shortly after to indicate system is searching
for chest belt signal.
2. Touch ENTER to skip heart rate signal search, then
+/ST/SP to start stopwatch.
MODE/-
START
If using chest belt to receive and record fitness data:
1. Touch MODE/- to select "EXE", "HR BELT" will be
displayed shortly after to indicate system is searching
for chest belt signal. Watch will display system used
(analog / digital), then the stopwatch screen.
Enter
+/ST/SP
2. A circle key press prompt will flash to guide you to touch
+/ST/SP to start stopwatch.
MODE/-

PAUSE, RESUME / STOP

If you need to take a break during exercise, touch +/ST/SP.
When ready, touch +/ST/SP to resume exercise.
To stop exercise and save data: Touch +/ST/SP to pause,
then touch MODE/-.
After a long pause, the watch will time out and automatically
save the data.
8
+/ST/SP
START