About The Hands-Free Microphone; 4. Common Operations - Toyota TomTom TNS400 Mode D'emploi

4.. About the hands-free microphone

The main unit is equipped with a built-in hands-free microphone. For details on using the hands-
free microphone, refer to the operation manual of the TomTom.
Attention: If you mistake the hands-free microphone for the [RESET] button etc. and press
the microphone with a sharp object, it may be damaged.

4.4. Common operations

About SCREEN button
Using the [SCREEN] button, the display on the TomTom can be switched between the audio and
navigation screen.
About FUNC/AF button
Using the [FUNC/AF] button, various settings (e.g. random, scan) can be made.
• Press the [FUNC/AF] button repeatedly until the item you want to set is displayed.
• When the item you want to set is displayed, press the [SELECT (Right/Left)] button and then
press the [ENTER] button to confirm.
About the rotary select mode
Pressing the [MODE/PTY] button will allow the channel or track select modes to be used. In the
rotary select mode, you can select a preset channel (or a track) with the [VOL] rotary knob.
• Press the [MODE/PTY] button. In the rotary select mode, "
• Select an item (preset channel or a track) with the [VOL] rotary knob and then press the
[ENTER] button to confirm.
Switching text display
By pressing the [TP/TEXT] button for a longer time, the displayed information can be scrolled to
confirm and the display style of the audio related information can be changed.
Built-in hands-free microphone
" will blink on the sub display.
TNS400