Pabx / Supplementary Services - switel DF73 Série Mode D'emploi

PABX / Supplementary Services

6 PABX / Supplementary Services
Private branch exchanges
Access code (number for an outside line)
In the case of private branch exchanges, it is necessary to dial a
specific number (e.g. 9" or 0") in order to obtain the dialling tone
for an outside line.
Dialling pause
In the case of private branch exchanges, it is necessary to dial a
specific number in order to obtain the dialling tone for an outside
line. When using some older private branch exchanges, it takes a
little time before the dialling tone becomes audible. Particularly in
the case of such private branch exchanges, it is possible to insert a
dialling pause after the number for the outside line so that the
number can be dialled in a continuous process without having to
wait for the dialling tone.
redial
P" appears in the display. After dialling the number for the outside
line, the telephone then waits a few seconds before dialling the
actual phone number.
The pause can also be entered with the phone numbers
in the phone book.
R button on private branch exchanges
If your telephone is connected to a private branch exchange, it is
possible to use the transfer calls and automatic call back functions
via the R button
plied with your private branch exchange to determine which Flash
time must be set in order to use these functions. The dealer where
you purchased the exchange can provide information as to whether
the telephone will work properly with the exchange. Flash (Recall)
time . Page 148
Flash time (recall time)
To operate the telephone in a private branch exchange, set the
Flash time to 100 ms. . Page 148
142
106
Insert a dialling pause
. Please refer to the operating manual sup-
clear