Pabx / Supplementary Services - switel TC49S Mode D'emploi

PABX / Supplementary Services

6 PABX / Supplementary Services
R button on private branch exchanges
The telephone can also be connected to a private branch exchange. The dealer where you pur-
chased the exchange can provide information as to whether the telephone will work properly with
the exchange.
If the telephone is connected to a private branch exchange, all the functions associated with the
R−button, such as transferring calls, automatic call back, etc., can be used.
PABX access code (number for an outside line)
When using private branch exchanges, it is necessary to dial a specific number to obtain the dial-
ling tone for an outside line. The number for an outside line is often 0" or 9". Dial this number first
and wait for the dialling tone. You can then dial the actual phone number.
Dialling pause
When using private branch exchanges, it is necessary to dial a specific number to obtain the dial-
ling tone for an outside line. When using some older private branch exchanges, it takes a little time
before the dialling tone becomes audible. In the case of such private branch exchanges, a dialling
pause can be inserted after the number for an outside line in order to continue dialling directly wi-
thout having to wait for the dialling tone.
è
ë
£
A P appears in the display for Pause".
ë
After dialling the number for the outside line, the telephone then waits 3 seconds before dialling the
actual phone number.
Answering machine in the telephone network
An answering machine in the telephone network is offered by many telephone network providers.
This function can only be used when your telephone network provider actually offers the service.
Contact them for any further information.
Call number display (CLIP)
If this function is available with your telephone line, the number of the caller appears in the display
when the phone rings. . Page 54
56
If one−touch and quick dial buttons are to be used for the telephone when connected to
a private branch exchange, please take this into consideration and enter the access code
before the actual phone number when programming the one−touch and quick dial buttons.
It is also possible to program a dialling pause between the number for an outside line and
the actual phone number. . Section Dialling pause"
The pause can also be stored when programming phone numbers as one−touch and quick
dial numbers.
The caller number display function is an optional service offered by telephone network
providers.
Contact your network provider for further information.
23
Lift the receiver
Dial the number for an outside line
Insert the dialling pause
Dial the phone number
24