Viscount Prestige 100 Guide Rapide page 41

4. [INPUT] section: this section contains the inputs through which the output signal of external
equipment is amplified with the organ's internal amplification system. The connections are as
follows:
o [L(+R)], [R]: stereo line inputs for connecting instruments with line outputs. For mono
sources use only the socket [L(+R)].
o [MIC]: Microphone input for amplifying any signal coming from a microphone.
o [GAIN]: trimmer for adjusting the input signal connected to the [MIC] input.
NOTE
The volume controls for the manuals, the pedal board and the Orchestra voices are in the
drawer under the keyshelf (see also par. 3), as well as the [MAN.I] and [MAN.III] swell
pedals (par. 2.4) also affect the levels of the audio output signals [MAIN OUT] and
[ANTIPHONAL OUT] found on the back panel and [OUTPUT] in the drawer under the
manuals. The only control that does not affect these outputs is the [GENERAL] trimmer.
EXAMPLE OF REAR OUTPUTS CONNECTIONS
Quick Guide - Viscount Prestige 100
39