Fitting; Installing.the.blade; Fitting.the.saw.chain; Tensioning.the.saw.chain - Grizzly BKS 25 L Traduction De La Notice D'utilisation Originale

•. Be.extremely.careful.during.sawing.
small.bushes.and.branches..The.thin.
branch.thicket.can.snag.in.the.saw.and.
whip.in.your.direction.or.make.you.un-
balanced.
•. Do.not.cut.wood.that.is.lying.on.the.
ground.
•. Pay.attention.to.a.possible.spring-back.
during.the.sawing.of.a.branch.which.
is.under.stress,.if.the.stress.force.of.the.
wood.is.suddenly.released..Danger.of.
injury.exists..
•. Check.the.safety.status.of.the.high.prun-
ing.saw,.in.particular.the.chain.bar,.
chain.brake.and.the.chain,.before.use.

Fitting

Installing the Blade
1... Loosen.blade.fixing.screw.(4).
and.remove.chain.wheel.cover.
(6).
. 2... Insert.blade.(2).with.the.central.
longitudinal.hole.over.central.
blade.guide.(16).
Fitting the saw chain
. 1... Lay.out.saw.chain.(1).such.that.
the.bevelled.cutting.edges.of.the.
chain.links.point.in.a.clockwise.
direction..See.the.detailed.illus-
tration.
. 2... Place.saw.chain.(1).in.blade.
groove.(2).and.on.chain.wheel.
(18).
. 3.. To.facilitate.assembly,.position.
the.chain.tensioning.pin.(21).by.
turning.the.chain.tensioner.(5).
towards.the.blade.fixing.screw.
(4).until.it.stops,.before.fitting.
the.chain.wheel.cover.(6).
. 4... Replace.chain.wheel.cover.(6).
and.screw.on.blade.fixing.(4)..
. 5.. Blade.fixing.screw.(4).is.simply.
to.be.tightened.lightly.by.hand.
Hole.(20).on.the.blade.is.the.
holder.for.chain.tensioning.pin.
(21)..Thread.(19).is.the.holder.
for.blade.fixing.screw.(4).
. Ensure.that.chain.tensioning.pin.
(21).is.positioned.in.hole.(20).on.
the.blade.The.pin.must.be.com-
pletely.inserted.into.the.hole.
Tensioning the saw chain
The.tension.of.saw.chain.(1).is.important.
both.for.your.safety.and.for.the.function.
of.the.high.pruning.saw..A.correctly.ten-
sioned.saw.chain.will.increase.the.lifetime.
of.your.equipment.
•. Saw.chain.(1).is.correctly.tensioned.
if.it.can.be.pulled.around.blade.2.by.
hand.(wearing.gloves).without.sag-
ging.
•. When.the.saw.chain.is.tensioned.with.
9.N.(approx..1.kg),.the.gap.between.
the.saw.chain.and.the.guide.rail.may.
not.be.more.than.2.mm.
•.. Turn.blade.fixing.screw.(4).anticlock-
wise.to.slightly.loosen.blade.(2)..
•. To.tighten.the.saw,.turn.the.chain.ad-
juster.screw.(21).clockwise..
•. To.loosen.the.tension,.turn.the.chain.
adjuster.screw.(21).anticlockwise.
•.. Turn.blade.fixing.screw.(4).clockwise.
to.retighten.blade.(2).
Where.saw.chain.(1).has.been.newly.ten-
sioned,.readjust.the.chain.tension.after.a.
short.period.in.operation.
Check.the.chain.tension.before.
each.use.of.the.high.pruning.saw.
GB
105