Starting The Machine - Kunzle & Tasin Bona Capricorn Manuel D'utilisation

Starting the Machine

To start the machine proceed as follows:
1.
Become familiar with
the machine and read all
instructions & safety notices.
Ensure that all operators read
this manual.
a.
Fiber dust bag: place the
dust bag on the suction pipe
by tying the cord over the
black rubber ring.
3.
Locate the power supply. The
socket must be compatible
with the plug. To avoid
electrical hazards the socket
must be grounded with a
fuse (20 A).
The maximum impedance
allowed for installation is
Zmax = 0,086 Ω.
14
2.
Place the paper dust bag on the suction pipe before the black
rubber ring and place it on the bag holder.
b.
4.
Open the abrasive belt
cover (A).
5.
Fit the abrasive according
to the 'Abrasive Assembly
Procedure' on page 17.
Bona Capricorn Manual
It possible to use instead of
the paper dust bag:
Remote control industrial
vacuum cleaner (maximum
length of suction pipe 10 m).
6.
Ensure the lever (A) is
engaged and the drum is
raised off the floor.