Instructions For Electrical Connection; Cables, Extensions And Plugs - Kunzle & Tasin Bona Capricorn Manuel D'utilisation

Commencing Operation (Cont.)

Instructions for electrical connection

This machine only operates
with the voltage and
frequency shown on the
machine data plate. Before
connecting the cable to the
power supply ensure the
correct voltage and frequency
are available.

Cables, extensions and plugs

Only use approved cables. The maximum recommended
cable length is 10m; for greater lengths use cables with
a larger cross-section.
MACHINE WITH 230 V~50 Hz MOTOR 2.2 kW
For machines with a 230 V~50 Hz motor, a HO5VV-F-3x2,5 mm
HAR-approved power supply cable must be used along with
an approved 2P+E CE 16 A 200÷-250 V plug.
This machine only operates
with the voltage and frequency
shown on the machine data
plate. Before connecting the
cable to the power supply
ensure the correct voltage and
frequency are available.
2
If the machine is not
connected correctly to the
electricity network, death due
to electrocution may occur.
To prevent electric shocks
always use a grounded three
wire electrical system. For
maximum protection against
electric shocks use a circuit
protected with a differential
cut-out switch.
Tampering with the grounding
plug in any way may result in
death from electrocution. DO
NOT cut, remove or break the
Using the machine with unsuitable and/or excessively long
cables may cause injury or damage to people or objects.
Using the machine with unsuitable and/or excessively long
cables may cause injury or damage to people or objects.
Bona Capricorn Manual
grounding plug. If the socket
does not match the plug
consult a qualified electrician.
Do not use the machine if the
switch malfunctions.
If the machine is used with
a damaged plug or power
supply cable, death may occur
from electrocution. If cables or
plugs are worn or damaged in
any way, have them replaced
by the manufacturer or
certified machine repair center
in order to prevent risks to
safety.
11
EN