Starting The Machine; Using The Flexisand - Kunzle & Tasin Bona FlexiSand 1.9 Manuel D'utilisation

Starting the Machine

Using the FlexiSand

1.
Become familiar with the
machine and read all
instructions & safety notices.
Ensure that all operators read
this manual.
5.
Press the start handle. Once
the start handle is pressed
down the switch lock button
can be released.
If you have not operated a Bona
ensure that no one or nothing is nearby before you start
the machine.
2.
Lower the handles to a
comfortable working position
by pressing the button
located on the top of the
handle.
If the machine becomes di icult to handle, release the start handles and the machine
will stop immediately.
Remember to connect the machine to a Bona
starting work.
FlexiSand previously,
®
3.
The shaft must be lowered at
least 10° or the machine will
not start.
DCS or other suitable vacuum system before
® TM
Bona FlexiSand 1.9 Manual
4.
Press and hold one of the
buttons (A) to activate the
switch lock.
17
EN