With Two People; Commencing Operation; Instructions For Assembly Following Transportation - Kunzle & Tasin Bona Capricorn Manuel D'utilisation

Transporting and Handling (Cont.)
7.
Loosen the handle (A) and
remove the suction pipe (B)
from its housing and take it to
the work area.

With two people

Transporting the machine with two people, proceed as follows:
1.
One operator should clasp
the handle grip (A).

Commencing Operation

Instructions for assembly following transportation

To re-assemble the machine after transportation, proceed as follows:
1.
Open the belt guard after
turning the screw counter-
clockwise with the provided
key.
8.
Lift the base frame by
clasping the front and back.
Bring the belt guard to the
chest and take it to the work
area.
2.
The second operator, pulling
out and holding the lift handle
(B), will lift the machine.
2.
Position the motor in its
housing.
3.
Loosen the belt tightener using the lever (A) and remove the
belts.
3.
Secure the motor by
tightening the knob (A).
Bona Capricorn Manual
4.
Fit and stretch the belts.
9
EN