Technical Specification - Elcometer 2020 Guide D'utilisation

5 TECHNICAL SPECIFICATION

5.1 ELCOMETER 2070 FINENESS OF GRIND GAUGES
d
Part Number
K0002070M001
K0US2070M001
Groove Length
Groove Width
Accuracy
Can be used in accordance with: ASTM D 1316
5.2 ELCOMETER 2050 FINENESS OF GRIND GAUGES
d
Part Number
K0002050M001
K0002050M002
K0002050M005
K0002050M008
K0US2050M001
K0US2050M002
K0US2050M005
K0US2050M008
Groove Length
Groove Width
Accuracy
Can be used in accordance with:
ASTM D 1210, AS/NZS 1580.204.1, DIN 53203, EN 21524, FTMS 141 4411.1, ISO 1524,
JIS K 5600-2-5, NF T30-046
d
Optional Calibration Certificates are available to purchase separately. Calibration Certificates must be
requested at time of order, they can not be supplied retrospectively.
en-5
R
µm / mils
0 - 25µm
0 - 1 mil
±3µm (0.12 mil) or 5% whichever is the greater
Range
µm
0 - 25µm
0 - 50µm
0 - 100µm
0 - 250µm
-
-
-
-
±3µm (0.12 mil) or 5% whichever is the greater
Range
NPIRI
0 - 10
0 - 10
165mm (6.5")
25mm (0.98")
mils
-
-
-
- 12.5µm
0 - 1 mil
0 - 2 mils
0 - 4 mils
0 - 10 mils
200mm (7.87")
12mm (0.47")
Graduations
2.5µm
0.1 mil
Graduations
µm mils
1µm
2µm
5µm
- 0.05 mil
- 0.1 mil
- 0.2 mil
- 0.5 mil
www.elcometer.com
-
-
-
-