Technical Specification - Elcometer 224 Guide D'utilisation

3 TECHNICAL SPECIFICATION

Fitted with a tough tungsten carbide user replaceable tip suitable for up
to 20,000 readings and available with standard or armoured metal
reinforced heavy duty cable, each convex surface profile probe is
supplied with an Elcometer Test Certificate, glass zero tile and
calibration foils; nominal values 125µm (5mil) & 500µm (20mils).
Flat surface profile probes are also available - contact Elcometer or
visit www.elcometer.com for details.
Range
Resolution
Accuracy
Part Number
T224C500UX
T224C500UXARM
Part Number
T224C500UX
T224C500UXARM
Applicable Patents: GB2505193, US9261345
†
www.elcometer.com
0 - 500µm (0 - 20mils)
1µm (0.1mil)
±5% or ±5µm (±5% or ±0.2mil)
†
Probe Design
Convex Surface Profile Probe: Standard
Convex Surface Profile Probe: Armoured
Minimum
Headroom
135mm (5.31")
175mm (6.89")
Minimum Pipe
Diameter
75mm (3")
75mm (3")
R
en-2