Gauge Information; Maintenance; Technical Specification - Elcometer 550 Mode D'emploi

4 GAUGE INFORMATION

The Elcometer 550 Non-Contact Uncured Powder Gauge provides the user with information specific to their
gauge such as serial numbers, software version and similar data in the About menu. Additionally, the energy
menu informs the user of the current battery state. If the measured battery voltage is displayed as less than
6.5V then it is necessary to recharge the battery.

5 MAINTENANCE

The Elcometer 550 Non-Contact Uncured Powder Gauge is designed to give many years reliable service
under normal operating and storage conditions.
The gauge does not contain any user-replaceable components. In the unlikely event of a fault, your gauge
should be returned to your local Elcometer supplier or directly to Elcometer. The warranty will be invalidated
if the instrument has been opened. Contact details can be found on the outside cover of these instructions,
or on the Elcometer website, www.elcometer.com

6 TECHNICAL SPECIFICATION

Measurement Range:
Resolution:
Accuracy:
Power Supply:
Charger:
Display:
Case Dimensions:
30µm to 110µm (1.18mils to 4.4mils) predicted cured thickness
1µm (0.04mils)
±5µm (±0.25mils) or 5% of the coating thickness, whichever is the greater
7.2V Ni-Mh rechargeable battery, (100-240V; 50-60Hz)
100-240V 50-60Hz fast charger
3.5" (90mm) QVGA colour LCD
115mm x 185mm x 35mm (4.6" x 7.4" x 1.4")
R
13