Function Mode; System Info; Dmx Channels - afx light MY712-Z Manuel D'utilisation

Function Mode

DMX Address
With this function, you can adjust the address from 001 to 512. Press the UP or DOWN button to find your desired
address. Press ENTER to set your desired DMX address.
DMX Channel
The LED moving head has 8CH and 15CH.
Running Mode
In Running Mode, DMX, Auto, Sound and Slave mode is displayed. Choose the operating mode.
Programs
Run one of the 8 built-in programs in Master mode.
Settings
(1) Pan Rev
Inversion of the Pan-movement.
(2) Tilt Rev
Inversion of the Tilt -movement.
(3) Display Rev
Inversion of the display.
(4)Sensitivity
In Sound-controlled mode, adjust the sensitivity from 0 to100. The higher the value, the higher the sensitivity.
(5) DMX Fail
If a problem occurs in DMX mode, you can select OFF or HOLD. In OFF position, the unit switches off if a problem
occurs. In HOLD position, it continues to work in the latest setting.
(6) Calibration
Allows to calibrate the unit.
(7) Factory Reset
Return to factory values. The default setting is NO.
(8) Reset Motor
If this function is selected, all motors reset to their original position.

5.6 System Info

Check the details of the Software version, operating mode, and, in DMXmode, the Address value 001.

DMX CHANNELS

8 channel definition table
Channel DMX Value
1 000-255
2 000-255
3 000-255
4 000-255
0-9
5 10-250
251-255
0-10
11-20
21-30
6
31-40
41-50
51-60
©Copyright LOTRONIC 2017
Function
Pan
Tilt
P/T Speed
Dimmer
Strobe open
Strobe from slow to fast
Strobe open
No function
R
G
B
W
R+W
MY712-Z Page 6