Set Function - afx light CITYCOLOR-800 Manuel D'utilisation

SET FUNCTION

-
Choose [SET] and press [ENTER]
-
[UPLD] : sending edit program value from current master unit to slave unit : To do it, press [ENTER] then do
the key code [UP, DOWN, UP, DOWN] and press [ENTER], light turn to yellow, means data was sending
meanwhile there will show the speed of upload, light will turn to green when finished sending, and the slave
unit will turn to yellow too when receive the data and turn to green when finished receiving. if the slave unit
protect to yellow, it means fail receiving, please cut off the power and receive again.
- [REST] : To load the factory setup.
-
Press [ENTER] and do the key code : [UP, DOWN, UP, DOWN] then press [ENTER]
-
[ID] : ID address setting, Press [ENTER], press [UP] / [DOWN] to choose [ON] to allow ID address function,
[OFF] close ID address function
-
[RGBW]: color deviation correcting setting, press [ENTER] and [UP]/[DOWN] to choose [ON] to allow color
deviation correcting function,[OFF] not allow. the proportion of RGBW colors can be set in the menu [CAL2]
- [DIM] : non-linear dimming setting, Press [UP] /[DOWN] to choose : [OFF] close dim speed, [DIM1] to
[DIM9] to choose speed ( speed 1 (fast ) ... speed94 (slow), as the speed is slower as dimming softer.
-
[DV] : Digital photography color, press [ENTER], and use [UP] /[DOWN] to choose [NTSC] or [PAL]
CAL1 FUNCTION ( WHITE BALANCE FUNCTION )
-
Choose [CAL1] and press [ENTER]
-
Press [UP] /[DOWN] to choose [WT1~11] then press [ENTER] to set up to 11 different temperature of white
color
o
Press [ENTER] to choose [Red], [Green], [Blue], [White]
o
Press [UP] /[DOWN] to choose value [0~255]
-
In STAG DMX mode, channel 7 is used to select between 11 temperature of white color
CAL2 FUNCTION ( COLOR DEVIATION CORRECTING SETTING )
-
Choose [CAL2] then press [ENTER] to [RGBW]
-
Press [ENTER] to choose [Red], [Green], [Blue], [White]
- Press [UP] /[DOWN] to choose the proportion of colors [0~510]
-
When the RGBW function is on ( menu SET ) and when on DMX RGB =255,255,255, the white color is the
one set in CAL2 function
© Copyright LOTRONIC 2015 CITYCOLOR-800 Page 6