Function Lockout - GETINGE Arjohuntleigh Enterprise E8000X Notice D'utilisation

Function lockout

Function lockout can be used to prevent operation of the
controls, e.g. when inadvertent movement of the mattress
platform could injure the patient.
To lock (prevent) or unlock (allow) functions:
Press the Function Lock button. The indicator above the button
will light.
Press the ACP button(s) corresponding to the function(s) to be
locked or unlocked. The "lock" indicator LED above each
function button shows its current status:
When all functions are locked or unlocked as required, press
the Function Lock button again or wait for five seconds. The
indicator above the Function Lock button will go out and the
lockout settings are stored.
When a function is locked, any associated functions are
automatically disabled, e.g. locking the backrest also disables Bio-
Contour and Auto-Chair.
Function lockout settings are retained if the bed is disconnected
from the electricity supply.
36
LED on = function locked
LED off = function unlocked.