3-Way Conference Home Or Mobile Call; Egister An Additional Handset - Telefunken TX 100 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Press HOME on the called handset.
4. Press OFF on the calling handset to transfer external call to called handset. OR press
MENU/OK
then UP/DOWN on the calling handset to select Transfer. Press MENU/OK to transfer.
B. 3-Way conference home or mobile call
You can hold a 3-way conference home or mobile call between 2 internal callers and 1 external
caller.
No subscription is required.
1. Follow steps 1 to 3 in section Transfer a home call
2. Press MENU/OK then UP/DOWN on the calling handset to select Share call.
3. Press MENU/OK to setup conference call.
Conference home and mobile calls
When you have calls established on the home and mobile lines, you can create a 3-way
conference.
To conference both home and mobile calls:
1. Press MENU/OK.
2. Press UP/DOWN to select Conf. home/Conf. mobile (whichever is applicable).
3. Press MENU/OK.
To select an option while on a conference call:
1. Press MENU/OK.
2. Press UP/DOWN to select one of the following options:
-
End home call
-
End mobile call
3. Press MENU/OK.
To end a conference call:
Press OFF or put the handset back in the telephone base or charger
Using the home and mobile lines together
You can be on two different calls using the mobile line and home line at the same time using
-
two handsets.
You cannot be on a call using the mobile line and a Bluetooth headset via the home line at the
-
same time. These are both Bluetooth devices and only one can be used at a time.
If you are on a call using the mobile line, you cannot join the call using your paired mobile
-
phone. However, you can join the call using another 9850BT handset. Your mobile phone is
being used for the phone call so only features that are normally available during a call can be
used.
C. Register an additional handset
Your additional handset(s) will come pre-registered but should you need to register a handset,
follow these steps.
1. In standby mode, press MENU/OK then UP/DOWN to select Settings.
2. Press MENU/OK then UP/DOWN to select Register.
3. Press MENU/OK then enter the system PIN. (Default is 0000.)
4. Press MENU/OK. Then the display will show Press and hold PAGE button.
TX Bluetooth Guide
72

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Tx 101Tx 102Tx 103Tx 151Tx 152Tx 153

Table des Matières