Important Safety Instructions; Getting Started; Location; Setting Up - Telefunken TX 100 Série Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury, including the following:
Read and understand all the instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool).
Do not overload wall outlets and extension cords as this can result in the risk of fire or electric
shock.
Unplug this product from the wall outlet and contact TELEFUNKEN under the following
conditions:
- When the power supply cord or plug is damaged or frayed.
- If the product does not operate normally by following the operating instructions.
- If the product has been dropped and the outer casing has been damaged.
- If the product exhibits a distinct change in performance.
Avoid using a telephone during an electrical storm.
There may be a remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the supplied NiMH (Nickel Metal Hydride) battery pack.
The operation periods for the handsets are only applicable with the default battery capacity
The use of other battery types or non rechargeable battery/primary mobile can be dangerous.
These may cause interference and/or unit damage.
TELEFUNKEN will not be held liable for damage arising from such noncompliance.
Use only the AC power adaptors supplied with this product.
Please ensure that the polarity plug is inserted correctly.
Do not immerse the battery pack in water, and do not place them in a fire.
Telephone receivers produce magnetic fields that can attract small metallic objects such as pins
or staples.
To avoid injury, do not place the handset where such objects can be picked up.

GETTING STARTED

1
A. Location
Make sure it is at least 1 meter away from other electrical appliances to avoid interference. Your
TELEFUNKEN TX 1** works by sending radio signals between the handset and base. The
strength of the signal depends on where you locate the base. Putting it as high as possible
ensures the best signal.
The maximum range between the base station and the handset is approximately 300 meters.
B. Setting up
Plug the mains power cable into the base station, Plug the other end of the mains power cable into
mains power wall socket and switch the power on.
TX Bluetooth Guide 43