Ringers; Chain Dialing - Telefunken TX 100 Série Mode D'emploi

Save a redial entry to the phonebook
1. In standby mode, press REDIAL/PAUSE.
2. Press UP, DOWN or REDIAL/PAUSE repeatedly to select the desired redial entry.
3. Press MENU/OK twice. The handset displays ENTER NUMBER.
Use the keypad to edit the number if necessary.
4. Press MENU/OK then UP/DOWN to select one of the following types:
- Home
- Mobile
- Work
- Other
5. Press MENU/OK. The handset displays ENTER NAME. Use the keypad to enter the name
Press MENU/OK to confirm.
Delete a redial number
1. In standby mode, press REDIAL/PAUSE.
2. Press UP, DOWN or REDIAL/PAUSE to select the desired redial entry.
3. Press MUTE/REMOVE to delete the selected entry.
Find handset (Paging)
You can ring a handset to help locate it.
1. Press PAGE on the base. All idle handsets ring and display ** Paging **.
2. Press PAGE on the base again to stop the paging, or press HOME, SPEAKER, MOBILE or
any dial pad key (0-9, *, or #) on any handset.
H. Ringers
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone
base without disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
Press OFF or MUTE/REMOVE on the handset and Ringer muted appears.
To silence the base ringer:
Press VOLUME- on the telephone base until L0 displayed in base LED.
Note: Each handset will ring when there is an incoming call unless the ringer volume is turned off.
Pressing OFF or MUTE/REMOVE on one handset will only silence the ringer of that particular
handset.
I. Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the phonebook, call
list history or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone numbers (such as
bank account information or access codes) from the phonebook, call list history or redial list.
To access a number in the phonebook while on a call:
1. Press MENU/OK then select Phonebook.
2. Select Home phonebook.
3. Scroll to the desired entry or perform an alphabetical search
4. Press MENU/OK to dial the displayed number.
To access a number in the call log while on a call:
1. Select Call log.
TX Bluetooth Guide 59